TEW-455APBO High Power Wireless Outdoor PoE Access Point
16
Chapter 3. AP Mode Configuration
When AP mode is chosen, the system can be configured as an Access Point. This section provides detailed
explanation for users to configure in the AP mode with help of illustrations. In the AP mode, functions listed in
the table below are also available from the Web-based GUI interface.
Table 3-1: AP Mode Functions
3.1 External Network Connection
3.1.1 Network Requirement
Normally, TEW-455APBO connects to a wired LAN and provides a wireless connection point to associate with
wireless client as shown in Figure 3-1. Then, Wireless clients could access to LAN or Internet by associating
themselves with TEW-455APBO set in AP mode.
Figure 3-1 Access Point on a Wired LAN Configuration
To Next Page
Loading...
Need help?
General
