TEW-455APBO High Power Wireless Outdoor PoE Access Point
41
3.4.2 Configure System Time
System time can be configured via this page, and manual setting or via a NTP server is supported.
Please click on System -> Time Server and follow the below setting.
Local Time : Display the current system time.
NTP Client : To synchronize the system time with NTP server.
Enable : Check to select NTP client.
NTP Server: Manually specify a custom NTP server domain name or address by selecting the
“Customize Time Server” option from the Default NTP Server drop-down list
Note: When specifying a custom time server, system time may take 10 minutes of system uptime to
update the time settings.
Default NTP Server : Select the NTP Server from the drop-down list.
Time Zone : Select a desired time zone from the drop-down list.
Daylight saving time : Enable or disable Daylight saving.
If the system time from NTP server seems incorrect, please verify your network settings, like default Gateway and DNS
settings under System > LAN.
To Next Page
Loading...
Need help?
General
