TEW-455APBO High Power Wireless Outdoor PoE Access Point
58
Note that VLAN ID in the WDS MAC List setting will only be tagged to egress packets on the wired Ethernet port. Ensure to
match VLAN ID used on the network of the peer. WDS link won’t carry tags at all.
WDS MAC List
Enable : Click Enable to create WDS link.
WDS Peer's MAC Address : Enter the MAC address of WDS peer.
VLAN ID : By default, it’s disabled with no VLAN ID. When desired, this system supports tagged VLAN
from 0 to 4094.
Description : Description of WDS link.
The WDS link needs to be set at same Channel and Security Type. For WMM and Security settings, please refer to section
3.3. For other system management, please refer to section 3.4.
Click Save button to save your changes. Click Reboot button to activate your changes
To Next Page
Loading...
Need help?
General
