©Copyright2017TRENDnet.AllRightsReserved.
TRENDnetUser’sGuide
TEW‐825DAP
31
3.ReviewthesettingsandclickApplytosavesettings.
SNMP:SelectenabletoenableSNMPfeature
Contact:Enterthecontactpersonorcontactinformationforyouraccesspoint.
Location:Enteranassignedlocationforyouraccesspoint.
CommunityName(Readonly):Enteranassignednameforyouraccesspoint.
Community(Read/Write):Enterapublicandprivatecommunityname.
TrapDestinationAddress:EnterthedestinationIPaddressoftheSNMPtrap.
TrapDestinationCommunityName:Enterthenameofthedestinationcommunity
SNMPv3:SelectoptiontoenableordisableSNMPv3
Username:Entertheusername
AuthProtocol:Selectfromthepulldownmenutheauthenticationprotocoltouse
AuthenticationKey:Entertheauthenticationkey
PrivProtocol:Selecttheprivateprotocol
PrivKey:Entertheprivatekey
EngineID:Entertheenginename
4.ClickonApplybuttontoapplythesettingsandthenclickontheSave/Reload
buttonlocatedonthetopleftsectiontosavethesettings.
EnableCLI
Management>CLISettings
CLI(CommandLineInterface)isauserinterfacewherecommandscanbesenttothe
accesspointintheformofsuccessivelinesoftext(commandlines).
1.Logintoyourmanagementpage(see“Accessthemanagementpage”onpage16).
2.ClickontheManagementtabandclickCLISettings.
3.SelectONandclickApplytosavesettings.
4.ClickonApplybuttontoapplythesettingsandthenclickontheSave/Reloadbutton
locatedonthetopleftsectiontosavethesettings.
LEDControls
Management>LEDControl
1.Logintoyourmanagementpage(see“Accessthemanagementpage”onpage16).
2.ClickontheManagementtabandclickLEDControl.
3.ReviewthesettingsandclickApplytosavesettings.
PowerLED:SelectOntoleavePowerLEDonorOffoptiontoturnoff.
LANLED:SelectOntoleaveLANLEDonorOffoptiontoturnoff.