Management VLAN
System > Management VLAN
1. Log into your management page (see “Access the management page” on page 13).
2. Click on the System tab and click Management VLAN.
3. Review the settings for both 2.4G and 5G profiles and click Apply to save settings.
• Enable: Select Enable to enable Management VLAN
• VID: Enter the VID to assign on the selected wireless network
• SSID: Displays the available SSID
• WiFi Security: Displays the wireless security type of the wireless network
• No VLAN Tag: Select this option to use no VLAN Tag
• Specified VLAN ID: Select this option and enter the assigned VLAN ID.
4. Click on Apply button to apply the settings and then click on the Save button located
on the top right section to save the settings.
Wireless Bandwidth Control
Wireless (2.4GHz or 5GHz) > Wireless Bandwidth Control
1. Log into your management page (see “Access the management page” on page 13).
2. Click on the Wireless (2.4GHz or 5GHz) tab and click Wireless Bandwidth Control.
3. Review the settings for both wireless bands (2.4GHz and 5GHz) and click Save to save
settings.
• Bandwidth Control: Select Enable to enable bandwidth control on this SSID
• SSID: The SSID that the following limits will apply to
• Download MAX: Choose to set a limit per client or limit shared with entire SSID,
then enter your network’s inbound traffic limit
• Upload Limit for Client: Enter your network’s outbound traffic limit for the selected
wireless band
4. Click on Apply button to apply the settings and then click on the Save button located
on the top right section to save the settings.
Enable SNMP
Management > SNMP Settings
SNMP (Simple Network Management Protocol) is a network management protocol used
to monitor (read) and/or manage (write) multiple network devices on a network. This
preconfigured external SNMP server.
1. Log into your management page (see “Access the management page” on page 13).
To Next Page
Loading...
Need help?
General
