Conversion Between MicronNav Responder and Transponder MicronNav System
0656-SOM-00001-07 138 © Tritech International Ltd.
Confirm the settings and close the SeaHub Setup page. Apply power to the Micron
Sonar/ROV and once the sonar has initialised the Main Setup page should list three
Node numbers in the table - the MicronNav100 Hub (SEAHUBNAV100), the USBL Head
(MINIATTSEN) and the Micron Sonar (MICRON).
The Micron Sonar Aux port now needs to be configured for the Responder unit connection.
This is done by clicking the Action arrow button in the MICRON row followed by Setup from
the drop-down menu to display the Digital Sonar Setup page.
To Next Page
Loading...