MicronNav System
0656-SOM-00001-07 87 © Tritech International Ltd.
5. Maintenance
Wash down with fresh water each time a unit is recovered from the water, paying particular
attention to the connector areas.
Although units are designed for a wide temperature range it is best to avoid temperature
extremes for long periods and protect units from bright sunlight.
Repairs are by major unit change out which may involve reprogramming a head. In these
cases instructions will be supplied.
It is recommended that usage logs are maintained and that the heads are returned to the
original supplier at 4000-hour intervals for routine inspection/replacement of O-ring seals.
The cables are high quality with low halogen jackets, which should provide long service
life without problems. Care should be taken to ensure that they are properly sited during
installation to avoid movement and fatigue, but otherwise no maintenance is required.
To Next Page
Loading...