Input the gauge moisture via the keypad and press 〈START/ENTER〉.
Press 〈START/ENTER〉.
► To enable the K value and store it in memory for later use, press
〈YES〉:
Enter the appropriate value (1-4) and press 〈START/ENTER〉:
► To enable the K value, but not store it in memory, press 〈NO/CE〉. The
value will be enabled, but will not be saved after it is disabled or the
gauge is turned off.
The offset will be enabled, but will not be saved after it is disabled or
the gauge is turned off. The display will then return to READY.
M
em
or
y
l
oca
ti
on
of
M
-Offse
t:
(1-4)
1-
True
M
x.x
%
2-
Gauge
M
x.x
%
ENTER
to
enable
Do
y
ou
wa
n
t
to
save
this
value
or later use?
SAVED
K
=x
.
xx
l
oc
at
i
on
x
ENABLED
K
=x
.
xx
ENABLED
K=x.xx
To Next Page
