CONTROL UNIT DISPLAYS: Printer Out of Paper Press
ENTER To Continue Or ESC To Abort
✓
See the printer Operating Instructions for details on installing
paper.
CONTROL UNIT DISPLAYS: Printer Offline Press ENTER
To Continue Or ESC To Abort
✓
Press 〈ON LINE〉 on the printer. See the printer Operating
Instructions for details on the printer control panel.
CONTROL UNIT DISPLAYS: No Data to Plot
✓
Compact a specimen before attempting to plot.
CONTROL UNIT DISPLAYS: Serial Printer Not Ready
✓
Check the serial cable and serial connection.
✓
When using GyroPave software, select Start from the Load
Data From Compactor screen before trying to load data either
automatically or manually.
HEIGHT-VERSUS-GYRATIONS DATA DOES NOT
DOWNLOAD TO THE COMPUTER
✓
Check that the Auto Output feature is turned on (see page 2-12).
✓
Check that the serial port is specified for the Auto Output
feature (see page 2-12).
✓
Check serial parameters: 9600 baud rate, 8 data bits, 2 stop bits,
and no parity.
✓
When using the GyroPave software, select Start from the Load
Data From Compactor screen before trying to load data either
automatically or manually.
To Next Page
Loading...