HEIGHT-VERSUS-GYRATIONS DATA DOES NOT PRINT
Ensure the Auto Output feature is turned on (see page 2-12).
PRESSURE-VERSUS-GYRATIONS DATA DOES NOT
PRINT
Check that the Pressure Printout feature is enabled (see page 2-17).
OTHER PRINTER PROBLEMS
✓
See the printer Operating Instructions for further printer
troubleshooting hints.
TURNTABLE DOES NOT APPEAR TO ROTATE AT
30 RPM
✓
Calibrate the rotation speed (see page 3-14).
✓
Call your Troxler representative.
GENERAL CALIBRATION PROBLEMS
✓
Check the calibration equipment power connection.
✓
Check all cable connections.
✓
For the height calibration, ensure that the puck and spacer are
centered on the turntable.
✓
For the pressure calibration, ensure that the load cell is centered
on the turntable.
✓
Repeat the calibration once. If you still have problems with the
calibration, call your Troxler representative.
To Next Page
Loading...