1-4
FEATURES
The oven incorporates a number of features that provide
unparalleled efficiency, safety, usability, and flexibility.
The oven can be powered from a 208–240 V AC, 50/60 Hz, 30 A
source. The oven is therefore convenient for use in construction
trailers, where power sources may be limited.
Oven Door Lock
The oven door lock helps ensure operator safety. The oven
monitors the state of the door and will not apply electrical
power to the heating element if the door is open. The oven door
is locked automatically at the start of a burn cycle. The door
remains locked until five minutes have elapsed since the
chamber temperature has peaked or since the
〈ABORT〉 key
was pressed.
Sample Basket
The sample basket assembly provides operator safety while
handling HMA samples, and to ensure an even burn of the
asphalt binder. A basket carrier is provided for lifting the
baskets in and out of the oven. A sample safety cage shields the
hot sample basket assembly while the asphalt sample cools.
Integrated Scale
The integrated scale continuously monitors the sample mass
loss during a burn cycle.
The oven features an Auto-Tare function that automatically
tares (zeroes) the integrated scale when no mass is present. The
oven software also enables the operator to tare the scale
manually, to calibrate the scale, and to verify the scale
calibration.
To Next Page
Loading...
Need help?
General
