ICO 1-9
UNPACKING AND INSPECTING
NOTE
To ensure the safe return of the oven to Troxler for
repair or maintenance, please keep the original
shipping box, pallet, and all packing materials. The
box folds for easy storage.
Upon receiving the oven from the factory:
1. Perform a complete inspection and inventory. If the
shipping case and/or any other part or accessory
appears damaged, notify the carrier and your Troxler
representative immediately.
2. Cut the bands from around the carton, then lift off the
top half of the box, and remove all accessory items.
3. Remove any packing material packed around the oven
or inside the oven chamber. Save all packing material,
including the plastic sheet used to cushion the inside of
the chamber door during shipping, for reuse if the oven
needs to be returned for service or repair. The box folds
for easy storage.
4. Remove the bottom half of the box.
5. Check the shipping case for the following items:
• Oven
• Steel Hearth plate
• Sample basket assembly, including sample baskets
(2), catch pan, and basket cover
• Basket carrier
To Next Page
Loading...
Need help?
General
