Troxler ICO 4740 User Manual

5-4
BURN SETUP MENU
The Burn Setup Menu is used to configure the parameters of
the burn mode and to turn the Auto-Print and Auto-Store
functions on or off. To display the Burn Setup Menu, press
(1)
at the MAIN MENU. The oven displays:
Burn Setup Menu
1. Burn Parameters
2. Set Chamber Temp
3. Auto-Print
4. Auto-Store
BURN PARAMETERS
The oven offers two burn modes: Program Time and Auto-
Control. In the Program Time mode, the burn time is set
manually. In Auto-Control mode, the oven automatically
completes a burn cycle when the incremental mass decrease of
the sample falls below a cutoff limit specified by the operator.
The burn mode is selected from the Burn Parameter Menu.
This menu is also used to select the calculation type (bitumen-
to-sample or bitumen-to-aggregate) and burn profile (Default,
Option 1, or Option 2).
To access the Burn Parameter Menu, press
(1) at the Burn
Setup Menu. The oven displays the following screens. Use the
up and down arrows to scroll through the menu options.
Burn Parameter Menu↕
1. Burn Mode
2. Burn Time
3. Cutoff Limit

Troxler ICO 4740 Specifications

General

Brand	Troxler
Model	ICO 4740
Category	Laboratory Equipment
Language	English