1
Chapter 1
Unpacking and Parts Identification
Carefully unpack the Model 8520 DUSTTRAK
TM
Aerosol Monitor from the
shipping container. Use the tables and illustrations below to make certain
that there are no missing components. Contact TSI immediately if anything
is missing or damaged.
Unpacking the D
USTTRAK Aerosol Monitor
Compare all the components you received with those listed in the table
below. If any parts are missing, contact TSI.
Model 8520 Aerosol Monitor
C-size Alkaline Batteries
115 V, NEMA-1-15
230 V, Eur., CEE 7/16
230 V, Great Britain
240 V, Australian
2613033
2613078
800169
2613105
Data Analysis Software CD-ROM
1 Computer Cable, 9-pin to RJ-45 800563
1 25-Pin to 9-Pin Serial Cable Adapter 962003
1 Model 8520 DUSTTRAK Aerosol Monitor
Operation and Service Manual
1980198
10 mm Nylon Dorr-Oliver Cyclone
Plastic Tubing, 1/4 in I.D.
1 Small Screwdriver 800661
1 Sample Nozzle Removal Tool 800662
8 Spare Internal Filter Element 1602188
1 Wrist Strap 2913028
1 Shoulder Strap 2913120
1 Sample Nozzle Cleaning Brush 800699
10 Cotton Swab —
1 Inlet Nozzle, 2.5 µm 1508112
1 Inlet Nozzle, 1.0 µm 1508113
1 Impactor Plate 1508114
1 Tube, Grease 801163
1 Analog Output/Alarm:connector, with cable 801652
To Next Page
Loading...
