Setting-Up
Correct Placement of Velcro Straps
The battery and the D
USTTRAK monitor are held in place by Velcro straps.
One end of each strap is secured into place. Figure B-6 shows the correct
placement of each strap (before the D
USTTRAK monitor and battery pack are
installed).
Figure B–6: Placement of Velcro Straps
Install D
USTTRAK Monitor into Environmental Enclosure
To correctly install the D
USTTRAK monitor follow the instructions below:
• Slip the free end of the Velcro strap through the slot on the DUSTTRAK
monitor portion of the main bracket (see Figure B-7).
Figure B–7: Slip Velcro Strap Through Slot in Bracket
To Next Page
Loading...
