6
CLEANING
A
Step 8
Step 9
Step 11
Step 10
Step 12
Step 13
Step 7: Remove Large Food Particles
DO NOT attempt to clean the heating element.
particles from the oven cavity.
Step 8: Clean the Oven Cavity
DO NOT spray TurboChef ® Oven Cleaner into the holes in the oven cavity.
bottom of the cavity.
DO NOT apply excessive pressure to the waveguide covers (A), located on
each side of the cavity.
DO NOT use a hose or water jet for cleaning.
Step 9: Wipe Down the Oven Cavity
Step 10: Clean and Dry the Oven Door
Step 11: Apply TurboChef
®
Oven Guard
DO NOT spray Oven Guard into the oven or apply to the heating element.
Step 12: Reinstall Components
back of the lter with the top-left hole on the back cavity wall. is will ensure the
other posts on the back of the lter t into the wall.
DO NOT operate the oven without the bottom jetplate installed. Doing so may
damage the oven.
has large openings, or has started to dislodge from the frame.
Step 13: Clean the Oven Exterior
and wipe it with a damp towel.
DO NOT spray chemicals into any openings, such as the louvers on the side
panels or the rear vent catalyst housing.
Step 7