18
INFO MODE
Auto On - YES/NO:
“Auto On” is a feature that turns the oven on auto-
matically at a specific time of day.
1. To set auto on, ensure the time of day is
accurate (see page 17).
enable Auto On.
3. Select which temperature to which the oven will
automatically heat up.
4. Enter the time in 24-hour format. Touch
“SAVE” to save all changes.
NOTE: The time will automatically convert to
12-hour format when saved.
Auto Off - YES/NO:
“Auto Off” is a feature that turns the oven off auto-
matically at a specific time of day.
1. To set auto-off time, ensure the time of day is
accurate (see page 17).
enable Auto Off.
3. Enter the time in 24-hour format. Touch
“SAVE” to save all changes.
NOTE: The time will automatically convert to
12-hour format when saved.
Info Mode: Service Screen
From the Service screen, view:
- Fault Log
- Counters and Timers
- Test Mode
Fault Log:
View the faults by Count or History. Use the toggle
to change between count view and history view.
Faults by Count:
Shows the number of faults occurred by fault code.
Press “Reset” to reset all counters to 0 and press the
down arrow to view the rest of the fault codes.
Faults by History:
View time stamps of each fault occurrence and the
fault code.
Figure 12: Info Mode, Auto On
Figure 13: Info Mode, Auto Off
Figure 14: Info Mode, Service Screen
Figure 15: Info Mode, Fault Log by Count
Figure 16: Info Mode, Fault Log by History
To Next Page
Loading...
Need help?
General