17
INFO MODE
Language:
The default language is English. To change to
another language, touch “Language: English”
and then touch the preferred language and touch
“ENTER.” The available languages are:
- French
- German
- Polish
- Portuguese
- Russian
- Spanish
The available languages may also be:
- Chinese
- Korean
- Japanese
Ethernet:
For help determining the correct network setup
information, contact your network administrator.
From the Ethernet setup screen (above), the follow-
ing information may be entered to configure the
oven for networking:
- IP Address
- Mask
- Gateway (GW)
- Domain Name Server (DNS 1)
- Alternate Domain Name Server (DNS 2)
- Wifi (ON/OFF)
The MAC IP address is automatically assigned.
If DHCP is turned on, the oven will automatically
be assigned an IP address when connected to a local
area network (if an IP address is available).
Sound Volume:
Touch “Volume” and use the plus or minus icons or
slider to increase or decrease the oven sound.
Set Date:
An accurate date is important for using “auto-on”
and “auto-off” (see page 18 for details). It also helps
ensure the accuracy of diagnostics and fault condi-
tion reporting.
NOTE: The oven may not retain the date if left
unplugged for a prolonged period of time (more
than several hours).
To set the date, touch “Date.” Enter the date in the
save the changes.
Set Time
An accurate time is important for using “auto-on”
and “auto-off” (see page 18 for details). It also helps
ensure the accuracy of diagnostics and fault condi-
tion reporting.
NOTE: The oven may not retain the date if left
unplugged for a prolonged period of time (more
than several hours).
NOTE: The clock will not automatically update for
Daylight Savings Time.
To set the time, touch “Time.” Enter the time
in 24-hour format (8:30 p.m. = 20:30). Touch
“ENTER” to save the changes.
NOTE: The user interface will automatically con-
vert the time to 12-hour format.
Figure 11: Info Mode, Ethernet Setup Screen
To Next Page
Loading...
Need help?
General