Tuttnauer EA - Page 4

7.3 How to Check the Safety Valve 40
7.4 Replacing the Safety Valve 41
7.5 How to Dismantle the Outer Covers of Autoclave --- 42
7.6 Temperature Safety Thermostat 43
7.7 Cut-out Thermostat 44
7.8 Heater replacing procedure 45
7.9 Pressure door lock system 45
8.0 Description and function of dip-switches -------------- 46
8.1 How to change the parameters 47
9.0 Test points - Table autoclave 48
10. PREDG board | 49
10.1 AJUNC -3 board 50
11.0 Calibration and Testing Procedure 51-52
* Printer 53
12.0 How to replace the electronics box 54
12.1 Replacing the door gasket 55
13.1 List of Spare Parts 56-58
Drawings
* Vessel Assembly 59
* Door tightening bolt-assembly 60
* Outer-cabinet assembly 61
* UNC bolt 62
* Left hinge 63
* Right hinge 63
* Door 64
* Tray holder 64
* Tray handle 65
* Water reservoir 65
Drawings
Piping Diagram EA, EKA
Electric Wiring Diagram 2340, 2540 EA, EKA