Tuttnauer EA - How to Dismantle the Outer Covers of Autoclave

7.6 TEMPERATURE SAFETY THERMOSTAT
Located on one side of the heater.
The autoclave is supplied with a temperature thermostat which maintains the temperature
during the dry stage, by connecting and disconnecting the electric power.
This device automatically reconnects when the chamber cools down.
To replace this safety thermostat, remove the rear cover, unscrew the thermostat and
replace It.
Caution:
Before moving the autoclave, make sure that the electric cord is
disconnected from the power source and that there is no pressure in the
chamber.
Απ =:
| o +, E
サン 」
ег fe pi DEE
1 1409?
SA ' SS
Ta | 5
1
Lo
“ 4 “es
it ~
e
; o + 4}
ri.
po .
42