Tuttnauer EA - Temperature Safety Thermostat; Cut-Out Thermostat

|
7.7 CUT-OUT THERMOSTAT
This thermostat cuts out the power to the autoclave, in the event that all other safety systems
do not function. For example: if the operator foryets to fill the chamber with water, and
then starts the sterilization cycle, the safety thermostat cuts the electricity to the heaters.
If it does not and the temperature still rises, then the cut-out thermostat will cut-out the
power to the autoclave. In order to restart the operation, press the Reset Button. If the
autoclave is operated according to the instructions, and the thermostat again cuts out, a
service technician should be called.
The thermostat can be calibrated with a screw driver by turning the center adjust
screw (1):
e clockwise to raise the temperature.
e counter-clockwise to lower the temperature.
GATE TY TRERMOSTAT 2 一
43