typical TW1-571 - Oiling the Hook; Oil Bowl for Hook Lubrication

Care and maintenance
10.03
Oiling the hook
Switch the machine off!
Danger of injury if the machine
is started accidentally!
● Before commissioning the machine, and
after long periods out of operation, pour
a few drops of oil into the hook race (see
arrow).
Fig. 10 - 02
10.04
Oil bowl for hook lubrication
Check the oil level before each
use.
There must always be oil in re-
servoir 1.
● If required refill oil through hole.
1
Use only oil with a mean
viscosity of 22.0 mm2/s at 40°C
and a density of 0.865 g/cm3 at
15°C.
We recommend TYPICAL
sewing machine oil Best.-Nr.
280-1-120 144.
Fig. 10 - 03
38