typical TW1-571 - Default Chapter; Table of Contents

Index
Contents Page
1. Safety 5
1.01. Directives 5
1.02. General notes on safety 5
1.03. Safety symbols 6
1.04. Important points for the user 6
1.05. Operating and specialist personnel 7
1.05.01. Operating personnel 7
1.05.02. Specialist personnel 7
1.06. Danger warnings 8
2. Proper use 9
3. Specifications 10
3.01. TYPICAL 571, 574, 591 10
3.02. Needles and threads 11
3.03. Possible models and subclasses 11
4. Disposal of Machine 12
5. Transportation, packing and storage 13
5.01. Transportation to customer‘s premises 13
5.02. Transportation inside the customer‘s premises 13
5.03. Disposal of packing materials 13
5.04. Storage 13
6. Explanation of symbols 14
7. Controls 15
7.01. On/off switch 15
7.02. Keys on the machine head (only for machines with -911/) 15
7.03. Bobbin thread monitoring with stitch counting (only with EcoDrive) 16
7.04. Pedal 16
7.05. Lever for lifting roller presser 17
7.06. Knee lever 17
7.07. Key for setting stitch length 18
7.08. Swing out roller presser 18
7.09. Edge trimmer -725/04 for 571 19
7.010. Edge trimmer -725/04 for 574 and 591 20
7.011. Control panel (only with Typical-Eco drive or Typical-Pico drive) 21
8. Installation and commissioning 22
8.01. Installation 22
8.01.01. Adjusting the table-top height 22
8.01.02. Fitting the tilt lock 23
8.01.03. Fitting the machine cover 23
8.02. Mounting the flange motor 24
8.02.01. Mounting the flange motor to the bearing plate 24
8.02.02. Mounting the flange motor to the machine 24
8.02.03. Mounting the toothed belt and adjusting the tension 25