UAZ PICKUP - Page 4

4
Х — geographical zone, where manufacturing plant is located;
Т — country code;
Т — manufacturing plant code.
Descriptive part II — vehicle index.
Indicating part III — year of vehicle manufacture and its order
number.
Chassis identication number is stamped on the right-hand
frame side member, at the rear (Fig. 1.3).
Fig. 1.1. Motor vehicle nameplate:
I — Full Transport Vehicle Type Approval number (TVTA);
II — Transport Vehicle identication number (VIN code);
III — Transport Vehicle maximum permissible weight;
IV — Maximum permissible weight of a transport vehicle with a trailer;
V — Maximum permissible load on the front axle;
VI — Maximum permissible load on the front back axle;
VII — Engine model identication;
VIII — Package code;
IX — Variant execution code;
Identication number (Fig. 1.2) consists of three parts:
Part I — manufacturer international identication number,
means: