41
— low fuel level signal device (yellow). It lights up when
less than 9 l of fuel is left in the right tank.
4 — trip computer switch. Switching over is performed by
pressing and turning the switch clockwise/counter-clockwise.
5 — LCD-display (depending on package) displays the fol-
lowing functions of the trip computer:
– coolant temperature in the engine (for dual needle cluster);
– fuel level in the fuel tank (for dual needle cluster);
– motor vehicle power supply voltage;
– motor vehicle total and daily mileage. Daily mileage counter
reset is performed by long (over 2 s) pressing the cluster switch;
– time of day (in 24-h format). To set the clocks, the ‘Clocks
setting’ mode should be switched on in the trip computer. By long
pressing the cluster switch (over 2 s), the setting mode is activated.
Hours/minutes values can be set by turning the switch clockwise/
counter-clockwise. Switching over between hours/minutes settings
is performed by short (less than 1 s) pressing the cluster switch;
– ambient temperature (depending on the package);
– date (in ‘XX month’ format). To set the date, the ‘Date setting’
mode should be switched on in the trip computer. By long press-
ing the cluster switch or button ‘Set/Reset’ on the understeering
switch (more than 2 s), the setting mode is activated. Day, month
and year can be set by turning the switch clockwise/counter-
clockwise. Switching over between day/month/year/minutes
settings is performed by short (less than 1 s) pressing the cluster
switch or button ‘Set/Reset’ on the understeering switch;
– instantaneous fuel economy (l/100 km);
– average fuel consumption (l/100 km);
– fuel distance (in km);
– current motor vehicle speed;
– average motor vehicle speed.
To Next Page
Loading...
