47
Fig. 3.11. Floor standing box with unit and keys control
(see item description in the text)
Engage all-wheel drive in due time before entering a difcult
road section!
Switching the mode of all-wheel drive with underdrive ‘4L’
ON/OFF shall be performed only in a stationary motor vehicle!
There is no manual gearbox mode indication in the cluster in
the initial position ‘2H’, only the back axle is driven.
Driving mode change 2Н=>4Н
To switch on all-wheel drive ‘4H’ mode:
– release accelerator pedal;
– press and hold the clutch pedal;
– set the handle from the ‘2Н’ position to the ‘4Н’ position. If
switching is successful, the symbol
is switched in the cluster;
– release the clutch pedal.
Block 1
Block 2
To Next Page
Loading...
