90
Heating and ventilation system is equipped with an air-
intake lter. The lter should be changed after 30,000 km mileage
or once per year, depending on what comes rst.
Access to the ltering element is provided below the dashboard,
at the feet of the front passenger.
Changing of ltering element 5 (Fig. 3.23) should be performed
as follows:
– force latches 3 away from cover and remove cover 4;
– replace ltering element 5;
– lock lter cover 4.
ATTENTION! Using the operation modes of the heater fan
from above average to maximum output rate in pouring rain con-
ditions can result in soaking of the air-intake lter and ingression
of moisture at the feet of the front passenger.
Interior ventilation
Blowing ventilation of the interior is performed via the same
channels, when the handle 1 (Fig. 3.21) is arranged at maximum
counter clockwise position. Drawing ventilation is performed via air
Fig. 3.23. Air fan:
1 — dashboard; 2 — fan; 3 — fan cover; 4 — cover latches; 5 — ltering element
To Next Page
Loading...
