Ultimaker S8 - Specifications

10
UltiMaker S8 Installation and user manual
Printer and
printing
properties
Technology Fused Deposition Modeling (FDM)
Print head Dual-extrusion print head with a unique auto nozzle-lifting
system, flood detection. and inductive probing
Feeder type Dual gripper feeder with tension adjustment, release
functionality and filament feed-rate control
Motion planner UltiMaker Cheetah, the world’s first and only jerk limited 3D
printer motion planner, with third order continuous, smooth
motion, and corner blending algorithm
Filament diameter 2.85 mm
Compatible print cores Print cores AA+ 0.4 and CC+ 0.4 (included)
Print cores BB 0.4 and DD 0.4 (sold separately)
Nozzle temperature Up to 340 °C (644 °F)
Dimensional accuracy ± 0.15 mm ± 0.15% feature nominal length*
*Typical accuracy based on selected geometries, materials, and
randomly selected machines
Build plate Heated flexible PEI build plate. Up to 120 °C (248 °F)
Build volume (XYZ) 330 x 240 x 300 mm (~ 13 x 9.4 x 11.8 in)
Build volume temperature Enclosed build volume < 50 °C (122 °F) open-loop temperature
control
Layer resolution Supported profiles: 0.1 - 0.2 mm
Custom range: 0.06 - 0.4 mm (depending on nozzle size)
Extrusion flow Up to 35 mm
3
/s
XY speed, acceleration, jerk Speed: Up to 500 mm/s, Acceleration: Up to 50 000 mm/s
2
,
Jerk: Up to 100 000 000 mm/s
3
Air manager Removes up to 95% of UFPs
Material handling Dual spool holder with NFC recognition
With Material Station: 6 material bays with NFC recognition
Display Fast responsive color touchscreen
Monitoring Full HD HDR camera
System on module ARM cortex quadcore at 1.8 GHz
Real-time controller 600 MHz Arm-cortex M7
Connectivity Wi-Fi 2.4 & 5 GHz: IEEE 802.11a/b/g/n/ac
LAN: Gigabit Ethernet
USB: 2.0
Physical
dimensions
Dimensions 495 x 585 x 800.5 mm (~ 19.5 x 23 x 31.5 in) (incl spool holder)
Dimensions with Material Station 495 x 488 x 1187.5 mm (~ 19.5 x 19.2 x 46.8 in)
Net weight 30 kg (66 lbs)
Net weight with Material Station 48 kg (106 lbs)
Ambient
conditions
Operating temperature
15 - 32 °C (59 – 90 °F), 10 - 90 % RH non-condensing
Non-operating temperature
0 - 32 °C (32 – 90 °F), 10 - 90 % RH non-condensing
Software
Print preparation
UltiMaker Cura 5.10 or newer
Printer management
UltiMaker Digital Factory
Supported OS
MacOS, Windows och Linux
Warranty
Warranty period
12 months
2.3 Specifications