39
IGNITION SWITCH AND METER PANEL (cont’d)
OPTIONAL MULTI-FUNCTION LCD DISPLAY (cont'd)
Performance Mode
Factory Default:
Traveling power level
Mode E (Economy ): For work requiring operation time to be saved or
customers using the unit for a long time.
Mode M (Manual): Use for custom speed setting. Power levels for
traveling can be set according to customer request.
Mode H (High-Power): For work or customers requiring higher traveling
speed.
Contact your Local Authorized Dealer for more information about how
to set Mode M (Manual).
OPERATING CONTROLS AND FUNCTIONS
Performance Mode M to Mode H
• After performance adjustment, operate the forklift
slowly and carefully until you become accustomed to the
new performance level. Be especially careful when the
performance level has been increased. Higher performance
levels can cause loads to shift, fall off or to be unstable
during starts, which could result in serious injury or death.
!
WARNING
!
To Next Page
Loading...
