25
On —
◙ to select.
Off —
◙ to select.
Digital
to select either on or off specifically for receiving digital channels.
On — Press
◙ to select.
Off — Press
◙ to select.
Setting the Display Orientation
[MENU] ◙ Settings ◙ Set Upside-down ◙
This setting controls the orientation of the display. If you set Upside-down to On, the scanner inverts the display text and graphics.
Adjusting the Display Contrast
There are 15 contrast levels. As you scroll from level 1 o 15 you see the contrast change. Press the Scroll Control to lock the
desired level until the time you desire to change it.
[MENU]
Settings Adjust Contrast ◙ Select a level Level 1 to…Level 15 ◙
Setting the GPS Format
[MENU] ◙ Settings ◙ Set GPS Format ◙
These settings control how the scanner handles GPS input when you are using the location-based functions.
Setting the Position Format
[MENU] ◙ Settings ◙ Set GPS Format ◙ Set Position Format ◙
This setting controls the format used for entering GPS coordinates into the scanner.
DMS: DDD MM SS.ss – Enter the location in Degree, Minute, Second format.
DEG: DDD.dddddd – Enter the location in Degree and fraction format.
Setting the Time Format
[MENU] ◙ Settings ◙ Set GPS Format ◙ Set Time Format ◙
This setting controls the format used for displaying the time on the GPS data screens.
12H – the scanner displays time in 12-hour format using am for mornings and pm for evening times.
24H – the scanner displays time in 24-hour format using 0 for midnight and 23 for 11 pm.
Setting the Time Zone
[MENU] ◙ Settings ◙ Set GPS Format ◙ Set Time Zone ◙
This setting controls the format used for adjusting Universal time to local time. Set your local time’s offset from UTC (formally known
as GMT).
Setting the Distance Units
[MENU] ◙ Settings ◙ Set GPS Format ◙ Set Pos Format ◙
This setting controls the distance units shown in the GPS data screens and used for entering distance for POI’s
mile – The scanner uses miles.
To Next Page
Loading...
Need help?
General
