50
Edit Service ◙
Select a service range:
Public Safety, News, HAM Radio, Marine, Railroad, Air, CB Radio, FRS/GMRS, Racing, TV Broadcast,
FM Broadcast, Military Air, Special
◙
Method Two
◙ (Func) + [SCAN/SEARCH]
Quick Search? Yes=E” / No=”.”
Press [.No] then
to Edit Service ◙.
At this point you can edit each of the settings that comprise each custom search range.
The following show you how to set the various option settings associated with a Service. For each, your starting operation is
[MENU]
Search for ... ◙
Edit Service ◙
Select a service range:
Set Delay Time
to select a value from 1 sec, 2 sec, 3 sec, 4 sec, 5 sec, and Off. ◙
Set Attenuator
to select to choose an attenuation for all frequencies in the range. ◙
On — the frequencies are attenuated.
Off — the frequencies are not attenuated.
Set Record
to select to enable a live audio output from REC to an audio recording device. ◙
On — the scanner outputs the signal.
Off — the scanner does not output any audio.
Assigning a Search Range to a Search Key
You can assign any of the Service or Custom Searches to the six Search keys for quick access to your favorite searches.
[MENU]
Search for ... ◙
Set Search Key ◙
Select the key to assign ◙
Select a search range ◙
[MENU]
Search for ... ◙
Now, to access that search, hold on any channel, then press ◙ and the number key [1] to [6] corresponding to the search range.
The default settings are:
SRCH 1: Custom 1
SRCH 2: Public Safety
SRCH 3: Railroad
SRCH 4: FRS/GMRS
To Next Page
Loading...
Need help?
General
