44
Select a channel group ◙
Edit Channel ◙
Select the channel ◙
Edit Frequency ◙
Use the [0] to [9] and [.No] keys to enter or modify a frequency. When you press the first place key, the cursor automatically moves
one character to the right. You can also
, clockwise or counter-clockwise to highlight any digit.
Editing the Talk Group ID MEL
[MENU] Program System ◙
Select a trunked system ◙
Edit Group ◙
Select a channel group ◙
Edit Channel ◙
Select the channel ◙
Edit TGID ◙
To edit the Talk Group ID, enter the Talk Group ID you want using the number keys. Then press
◙.
Setting the Audio Type MECL
For each channel, you can select the audio type that the channel receives.
[MENU]
Program System ◙
Select the system ◙
Edit Group
Select the group ◙
Edit Channel ◙
Select an existing channel ◙
Set Audio Type ◙
Select from All, Digital Only, Analog Only ◙
All – The scanner automatically determines whether the audio is analog or digital.
Digital Only – The scanner only remains on the channel if it is carrying APCO 25 digital audio
Analog Only – The scanner only remains on the channel if it is carrying analog audio.
If you are programming a conventional system and select Analog Only, the scanner prompts you to select the CTCSS/DCS tone
setting. See the next section.
Selecting CTCSS/DCS Tones C
To program a channel with a CTCSS or DCS setting, your conventional system audio must be set to Analog Only first.
[MENU]
Program System ◙
Select the system ◙
To Next Page
Loading...
Need help?
General
