54
Setting Service Search
1
Custom Search
1
Quick Search Search
and Store
Close Call CC Auto
Store
CC Hits
System
Freq. Lockouts
● ● ● ● ● ●
Broadcast Screen
● ● ●
2
● ●
CTCSS/DCS Search
● ● ● ● ● ●
Repeater Find
● ●
●
Max Auto Store
●
●
Set Delay Time
●
●
●
Set Modulation
●
● ●
Set Attenuator
●
● ●
Set Data Skip
●
● ●
3
● ● ●
Set Step
●
Set Record
●
●
●
Adjust P25 Level
●
●
●
●
1 — Valid only for searching a range using Search with Scan.
2 — Valid only for storing a frequency from Search and Store.
3 — Valid only for storing a frequency from Service Search.
Managing Locked-Out Frequencies
While searching or during Close Call operation, if you press [L/O] while the scanner is stopped on a frequency, that frequency is
locked out of these modes. The temporary L/O frequency limit is 250. The permanent L/O frequency number limit is up to 250
Unlocking All Frequencies
[MENU] Srch/CloCall Opt ◙
Freq Lockouts ◙
Unlock All ◙
The scanner prompts you to confirm deletion. To confirm and delete all locked-out frequencies, press
◙. If no frequencies are locked,
you see Nothing Locked Press Any Key. Otherwise, to cancel, press [MENU] to backstep.
Reviewing Locked Out Frequencies
[MENU] Srch/CloCall Opt ◙
Freq Lockouts ◙
Rvw Search L/O ◙
The scanner displays the first locked-out frequency and prompts you to unlock the frequency. Press
◙ to unlock the frequency. Or,
rotate the Scroll Control or press to select a different frequency. If there are no frequencies to review, you see Nothing Locked
Press Any Key. Otherwise, to cancel, press [MENU] to backstep.
Searching for Subaudible Tones
[MENU] Srch/CloCall Opt ◙
CTCSS/DCS Search ◙
On or Off ◙
To Next Page
Loading...
Need help?
General
