74
Copyright 2014 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
UPC-E1
Most U.P.C. bar codes lead with the 0 number system. For these codes, use UPC-E0 (page
71). If you need to read codes that lead with the 1 number system, use the UPC-E1 On
selection. Default = Off.
EAN/JAN-13
<Default All EAN/JAN Settings>
EAN/JAN-13 On/Off
Note: If you want to convert UPC-A bar codes to EAN-13 format, scan the UPCA Off bar code
on page 67.
To Next Page
Loading...
Need help?
General
