Unitek DVR-404 - SMTP Server IP Address; Authentication; Event Log

To Next Page

To Previous Page

4 & 8 & 16 Channel DVR Operation manual Revision 1.0

3.3.6.3 SMTP Server IP address

If you click ftp address , key board shaped will turn on the screen.

Put the suitable server address (ref.3.6.4.6(STATIC)& 3.6.6.4(PPPoE))

If you want Domain name instead of IP address under PPPoE, STATIC , a suitable DNS

server address should be at the network setting menu.

If you do not know your SMTP server IP address then go to Command Prompt in Windows,

then use ping and SMTP name address eg smtp.yahoo.com as below to get your SMTP IP

address.

3.3.6.4 Authentication

Users can select authentication process dependent on SMTP server requirement.

Selects on/off for authentication process do authentication process whenever transmitting e-

mail messages through SMTP server.

3.3.7 Event Log

Shows the event log of the selected channel. It can reset periodically by setting e-mail as

described in paragraph 3.3.7.

Figure. 3-17 Event Log Display screen