EasyManua.ls Logo

Unitek DVR-404 - Remote Connection Login Password

Unitek DVR-404
127 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
50
4 & 8 & 16 Channel DVR Operation manual Revision 1.0
update its IP address to the DDNS server. Therefore DDNS Link on NETWORK SETUP
menu should be on. (When IP router is connected from static IP, it is no necessary to setup
DDNS link on)
By indicating the address of a DDNS Server, the DVR will update its IP address and its MAC
address periodically. Therefore, when users access the DVR over the network, the same
URL can be used. For example, if the DVR has a MAC address of “00:09:F8:12:34:56” and
the domain name of the DDNS server is “ns.udrdns.net ”, the users can access the DVR with
the URL “u123456.udrdns.net” The DDNS will know which machine to resolve the URL
because it would contain an updated IP address and MAC address list.
The factory default value of the DDNS server address from UNIMO Technology Co, Ltd. is as
follows:
DDNS address 1 : 221.139.14.109
DDNS address 2 : 211.104.85.235
DDNS connection port: 7100
If users wish to operate the DDNS server by themselves, please contact us.
3.6.2 Remote Connection Login Password
There are two levels of access that can be set up in the RAMS program.
- Admin (Highest), User (Normal)
- By default, the password is 111111 when the software is first installed.
Users can use any numeric number from 1~4, combined 6 units.
-

Table of Contents