Universal Robots E Series

Safety control board
The safety control board serial number is located on the back of the safety control board. You must
disassemble the control box bracket to access the Rev. F2 safety control board (F2 = RM).
NOTE
For more information about changing the safety control board, refer to the Control
Box chapter in the Service Manual available on the support website:
•
https://www.universal-robots.com/support/
Installation Guide 9
e-Series Injection Molding Machine
Interface (IMMI)
3.Product description
Copyright © 2019–2021 by UniversalRobotsA/S. All rights reserved.