2.Safety
2.1. Safety message types
Safety messages in this document contain information to help you avoid injury or equipment
damage. This document contains the following safety message types.
WARNING
This safety message indicates a hazardous situation that, if not avoided, could result
in death or serious injury.
CAUTION
This safety message indicates a hazardous situation that, if not avoided, could result
in minor or moderate injury.
NOTICE
This safety message indicates a situation that, if not avoided, could result in damage
to equipment or property.
2.2. General safety precautions
This section contains general safety precautions, read it before installing the IMMI.
For more information on safety, refer to the Safety section in the robot User Manual.
WARNING
Performing installation or maintenance of equipment connected to a power source
can lead to electric shock.
•
Ensure the equipment is disconnected from the power source before
performing installation or maintenance.
e-Series Injection Molding Machine
Interface (IMMI)
2 Installation Guide
2.Safety
Copyright © 2019–2021 by UniversalRobotsA/S. All rights reserved.
To Next Page
Need help?
General
