Universal Robots UR10 Service Manual

All rights reserved 44 Servicemanual_UR10_en_3.1.3
3.2 Controller
3.2.1 Handling ESD-sensitive parts
To prevent damage to ESD-sensitive parts, follow the instructions below in addition to all the
usual precautions, such as turning off power before removing logic cards:
.
Put the ESD wrist strap on your
wrist. Connect the wrist band to
the system ground point.
This discharges any static electricity in your
body to ground.
Keep the ESD-sensitive part in its
original shipping container.
(a special "ESD bag") until the part is ready to
be installed

Universal Robots UR10 Specifications

General

Brand	Universal Robots
Model	UR10
Category	Robotics
Language	English