Universal Robots UR10e PolyScope X - Page 112

IEC 61784-3
Clause Description
Safety of
machinery –
Electrical
equipment of
machines Part 1:
General
requirements
---
IEC 60664-1
IEC 60664-5
Clause Description
Insulation
coordination for
equipment within
low-voltage
systems Part 1:
Principles,
requirements and
tests Part 5:
Comprehensive
method for
determining
clearances and
creepage distances
equal to or less than
2 mm
---
EUROMAP
67:2015, V1.11
Clause Description
Electrical
Interface
between
Injection
Molding
Machine
and
Handling
Device /
Robot
The E67
accessory
module, that
interfaces with
injection
molding
machines,
complies with
this standard.
UR10e PolyScope X 112 User Manual
14.Applied Standards
Copyright © 2009–2024 by UniversalRobotsA/S. All rights reserved.