Universal Robots UR10e PolyScope X - Purpose of this Manual

17.4. Purpose of this Manual
The purpose of this document is to allow for the safe setup of a UniversalRobots robot arm with the PolyScope
X software. The instructions in this document shall be considered as general guidelines.
It is assumed that the integrator has a high level of technical knowledge.
UniversalRobots disclaims any liability, even though all guidelines contained within this document are
followed.
Always perform a thorough risk assessment for the specific application.
Consult the safety section in the Universal Robots User Manual for general precautions.
UR10e PolyScope X User Manual
Copyright © 2009–2024 by UniversalRobotsA/S. All rights reserved.