Universal Robots UR10e PolyScope X - Preface

1.Preface
Introduction Congratulations on the purchase of your new Universal Robots
robot, which consists of the robot arm (manipulator), Control Box
and the Teach Pendant.
Originally designed to mimic the range of motion of a human arm,
the robot arm is composed of aluminium tubes, articulated by six
joints, allowing for a high range of flexibility in your automation
installation.
The Universal Robots patented programming interface, PolyScope,
allows you to create, load and run your automation applications.
What Do the
Boxes Contain
When you order a robot, you receive two boxes. One contains the
Robot Arm, the other contains:
•
Control Box with Teach Pendant
•
Mounting bracket for the Control Box
•
Mounting bracket for the Teach Pendant
•
Key for opening the Control Box
•
Cable for connecting the robot arm and the Control Box (see
options in 15 Technical Specifications UR10eon page113)
•
Mains cable or Power cable compatible to your regions
•
This manual
UR10e PolyScope X 8 User Manual
1.Preface
Copyright © 2009–2024 by UniversalRobotsA/S. All rights reserved.