Universal Robots UR10e PolyScope X - Certifications

9.Certifications
Description Third party certification is voluntary. However, to provide the best service to robot
integrators, Universal Robots chooses to certify its robots at the recognized test
institutes listed below.
You can find copies of all certificates in the chapter: Certificates.
Certification
TÜV Rheinland
Certificates by TÜV Rheinland to EN
ISO 10218-1 and EN ISO 13849-1.
TÜV Rheinland stands for safety and
quality in virtually all areas of business
and life. Founded 150 years ago, the
company is one of the world’s leading
testing service providers.
TÜV Rheinland
of North America
In Canada, the Canadian Electrical
Code, CSA 22.1, Article 2-024
requires equipment to be certified by a
testing organization approved by the
Standards Council of Canada.
CHINA RoHS
Universal Robots e-Series robots
conform to CHINA RoHS
management methods for controlling
pollution by electronic information
products.
KCC Safety
Universal Robots e-Series robots
have been assessed and conform to
KCC mark safety standards.
KC Registration
The Universal Robots e-Series robots
have been evaluated for conformity
assessment for use in a work
environment. Therefore, there is a risk
of radio interference when used in a
domestic environment.
Delta
Universal Robots e-Series robots are
performance tested by DELTA.
Supplier Third
Party
Certification
Environment
As provided by our suppliers, Universal Robots e-
Series robots shipping pallets comply with the
ISMPM-15 Danish requirements for producing
wood packaging material and are marked in
accordance with this scheme.
User Manual 85 UR10e PolyScope X
9.Certifications
Copyright © 2009–2024 by UniversalRobotsA/S. All rights reserved.