Copying Functions
4-35
4
Color Balance
Adjust the strength of cyan, magenta, yellow, and black to make fine hue adjustments.
NOTE: This feature can be used with full color copying and auto color copying.
Follow the steps below to adjust color balance.
1 Press the Copy key.
2 Place the originals on the platen.
3 Press [Color/Image Quality] and then press [Color
Balance].
4 Press [On].
5 Press [ ] or [ ] on each side of the color to be
adjusted (Cyan, Magenta, Yellow, Black) to adjust
each color.
6 Press [OK].
7 Press the Start key. Copying begins.
To Next Page
Loading...
