Sending Functions
6-22
Background Density Adj.
Remove dark background from originals, such as newspapers. The smaller the number becomes lighter the
background becomes. If the ground color is obtrusive, select [Auto]. If [Auto] does not remove the ground color,
select [Manual] and adjust the density of the ground color.
Use the procedure below to set the background density when sending scanned images.
1 Press the Send key.
2 Place the originals on the platen.
3 Press [Color/Image Quality] and then [Background
Density Adj.].
4 Press [Auto] or [Manual].
5 When [Manual] is selected, press [1] to [5] (Lighter
- Darker) to adjust the background density.
6 Press [OK].
7 Specify the destination, and press the Start key to
start sending.
To Next Page
Loading...
Need help?
General
