Maintenance
11-2
Regular Maintenance
Toner Container Replacement
When toner runs low, "Toner is running out" appears in the touch panel. Make sure you have a new toner
container available for replacement.
When the touch panel displays Toner is empty., replace the toner.
Every time you replace the toner container, be sure to clean the parts as instructed below. Dirty parts may
deteriorate output quality.
NOTE:
• For the toner container, always use a genuine toner container. Using a toner container that is not genuine
may cause image defects and product failure.
• The memory chip in the toner container of this product stores information necessary for improving customer
convenience, operation of the recycling system for used toner containers, and planning and development of
new products. The stored information does not include information that makes it possible to identify
individuals, and is only used anonymously for the above purposes.
CAUTION: Do not attempt to incinerate the toner container or the waste toner box. Dangerous sparks
may cause burns.
Installation procedures of the toner container is same for every color. The procedures here represent the yellow
toner container.
1 Open the front cover.
2 Turn the toner container release lever to the vertical
position.
To Next Page
Loading...
Need help?
General
