Utax CDC 1930

Default Setting (System Menu)
9-78
3 Select [MM/DD/YYYY], [DD/MM/YYYY], or [YYYY/MM/DD] and press [OK].
Time Zone
Set the time difference in the location you are from GMT.
Use the procedure below to set the time difference.
1 Press the System Menu key.
2 Press [ ], [Date/Timer] and then [Change] of Time Zone.
3 Select the location.
NOTE: Press [ ] or [ ] to select the location.
4 Press [Off] or [On] of Summer Time and press [OK].
NOTE: If you select a region that does not utilize summer time, the summer time setting screen will not appear.
Auto Panel Reset
If no jobs are run for a certain period of time, automatically reset settings and return to the default setting.
NOTE: Refer to page 9-16 for the default settings.
Auto Panel Reset
Select to use Auto Panel Reset or not.
Use the procedure below to specify the auto panel reset setting.
1 Press the System Menu key.
2 Press [ ], [Date/Timer] and then [Change] of Auto Panel Reset.
3 Press [Off] or [On].
4 Press [OK].