Default Setting (System Menu)
9-42
Message Banner Print
This sets whether or not the confirmation screen appears before each sheet is printed when printing multiple
banner sheets.
NOTE: Select this setting when the optional banner tray is attached.
The table below shows the available settings.
The procedure is as follows.
1 Press the System Menu key.
2 Press [Common Settings] > [ ] twice > [Change] in Message Banner Print.
3 Press [Off] or [On].
4 Press [OK].
Item Description
Off The confirmation screen is not displayed. (Paper is fed continuously.)
On The confirmation screen is displayed before each sheet is printed.
To Next Page
Loading...
Need help?
General
