Utax CDC 1930

Default Setting (System Menu)
9-70
Background Density Adj.
Adjust the density used when the background of documents is automatically adjusted.
Use the procedure below to set the Background Density Adj..
Copy (Auto)
1 Press the System Menu key.
2 Press [ ], [Adjustment/Maintenance] and then [Next] of Background Density Adj..
3 Press [Change] of Copy (Auto).
4 Press [-3] - [+3] (Lighter-Darker) to adjust background density.
5 Press [OK].
Send/Box (Auto)
1 Press the System Menu key.
2 Press [ ], [Adjustment/Maintenance] and then [Next] of Background Density Adj..
3 Press [Change] of Send/Box (Auto).
4 Press [-3] - [+3] (Lighter-Darker) to adjust background density.
5 Press [OK].
Drum Refresh
Refresh the drum when image blur or white spots appear on images in copies.
NOTE: Drum Refresh cannot be performed while printing. Execute Drum Refresh after the printing is done.
Use the procedure below to refresh the drum.
1 Press the System Menu key.
2 Press [ ], [Adjustment/Maintenance].
3 Press [Next] of Drum Refresh.
4 Press [Start] to perform Drum Refresh.
5 After Drum Refresh is completed, press [OK] to return to the Adjustment/Maintenance screen.