EasyManuals Logo

Utax CDC 1930 User Manual

Utax CDC 1930
588 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #321 background imageLoading...
Page #321 background image
Default Setting (System Menu)
9-15
9
Use the procedure below to specify the settings for error handling.
1 Press the System Menu key.
2 Press [Common Settings] and then [Next] of Error Handling.
3 Press [Change] at the error for which you wish to change the handling.
4 Select the error handling method in the selection screen for each of the errors and then press [OK].
5 The previous screen appears. To set the handling for a different error, repeat steps 3 and 4.
Paper Output
Select the output tray respectively for copy jobs, print jobs from Custom Box, computers, and FAX RX data. The
options are as follows.
NOTE: The optional inner job separator, right job separator, 1,000-sheet finisher, and 4,000-sheet finisher are
required.
When [Heavy 3] (164 g/m
2
- ) or higher is set in Paper Weight and Mailbox (Option) is set for the output
destination, the output destination is automatically changed to a tray that can be used.
FAX RX data output can be specified when the optional fax kit is installed.
IMPORTANT: If you want to enable the changed defaults immediately, move to the function screen and press
the Reset key.
Use the procedure below to select the output tray.
1 Press the System Menu key.
2 Press [Common Settings] and then [Next] of Paper Output.
3 Press [Change] of Copy/Custom Box, Printer, or FAX Port 1 or FAX Port 2.
NOTE: FAX Port 1 appears when the optional fax kit is installed.
If you have 2 optional fax kits installed, Fax Port 2 appears. You can specify the output tray for the second kit
(Dual FAX).
4 Select the Output Tray.
Output Tray Descriptions
Inner Tray*
* This cannot be selected when the optional document finisher is installed.
Delivery on the Inner Tray of the machine.
Tray A, Tray B, Tray C Delivery to trays A - C of the optional 4,000-sheet finisher.
Finisher Left Tray
Finisher TOP Tray
Delivery to the left tray or top tray of the optional 1,000-sheet finisher.
Right Tray Delivery to the optional right job separator.
Job Separator Tray* Delivery to the optional inner job separator.
Tray 1 to 7 Delivery to trays 1 to 7 in the optional mailbox (tray 1 is the top tray).

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Utax CDC 1930 and is the answer not in the manual?

Utax CDC 1930 Specifications

General IconGeneral
BrandUtax
ModelCDC 1930
CategoryAll in One Printer
LanguageEnglish

Related product manuals